Use Of Receiving/Calling Records Or Telephone Directory (Phonebook) - Panasonic CQ-BT5107U Operating Instructions Manual

Note : To have a mobile phone conversation with use of this unit, the mobile phone shall be compatible
with the Hands-Free Profile.

Use of receiving/calling records or telephone directory (phonebook)

1
Press [BAND] at the standby state.
2
Push [SEL] (Select).
The display changes as follows:
Receiving record with no responding
The record of receiving calls (up to 5 records) that have not been taken is
displayed.
Rotation of [VOLUME] allows users to switch the record to be dis-
played.
Pressing [PHONE] allows users to make a call to the displayed
record.
Receiving record with conversation made
The record of receiving calls (up to 5 records) that have been taken is
displayed.
Rotation of [VOLUME] allows users to switch the record to be dis-
played.
Pressing [PHONE] allows users to make a call to the displayed
record.
Calling record
The calling record (up to 5 records) is displayed.
Rotation of [VOLUME] allows users to switch the record to be dis-
played.
Pressing [PHONE] allows users to make a call to the displayed
record.
Telephone directory
The telephone directory is displayed.
Rotation of [VOLUME] allows users to switch the data registered on
the telephone directory to be displayed. (up to 6 entries)
Pressing [PHONE] allows users to make a call to the displayed data.
Pressing [BAND] allows the deletion mode to be activated to delete
the displayed data on the telephone directory. If [BAND] is pressed
again after "DEL THIS!?" appears, the currently displayed one piece
of data on the telephone directory is deleted.
Note : To use this function, the telephone directory must be imported from
Bluetooth ® mobile phone to this unit. (Refer to the below)
Telephone directory manually import mode
This unit becomes standby for importing the telephone directory from a
Bluetooth ® mobile phone. (Each time for single directory data transmission)
Operate the Bluetooth ®
rectory data to this unit.
Notes :
¡
To use this function, the mobile phone must be compatible with the
Object Push Profile.
¡
"FAIL" is displayed and the regular mode is restored if 1 minute
elapses in the "IMPORT" flashing period without importing the
telephone directory from mobile phone.
mobile phone to transmit the telephone di-
19
CQ-BT5107U