Page 3
Manager Research and Development standardien ja normatiivisten ohjeiden mukainen: EN 50 144, Directeur de recherce et développement EN 55 014, EN 61 000 direktiivien 98/37/EY, 89/336/EY määräysten mukaan. Festool GmbH Wertstr. 20 D-73240 Wendlingen EF-konformitetserklæring: Vi erklærer at have alene Dr. Johannes Steimel ansvaret for, at dette produkt er i overensstemmelse med de følgende normer eller normative dokumenter:...
Page 4
Technical data RO 125 EQ Power supply and start-up Power 500 W The mains voltage must correspond to Speed 3000 - 6000 rpm the specification on the rating plate. Sanding stroke 3.6 mm Weight (excluding cable) 1.9 kg To switch on the machine, press the switch (1.2) downwards and forwards until it locks...
Page 5
(fine sanding). extractor. Press the switch (1.1) downwards and push it into the left-hand position. You can connect a Festool extractor with an extractor hose diameter of 27 mm to the Sanding pad brake extractor connector (1.4). The rubber collar (3.1) prevents the sanding...
Page 6
The tool is fitted with special motor brushes being sent back to the suppliers or to an with an automatic cut-out. When the brushes authorised Festool customer support become worn the power supply is shut off workshop.