Table of Contents
Advertisement
Programming the oven
There are different ways to programme the oven. Programming
the type of heating, temperature or grill power. The oven can be
programmed with the cooking time (duration) and the end time
for each dish. For more information, see the chapter Setting the
time functions.
Type of heating and temperature
Example in the picture: top and bottom heating
Select the type of heating using the function control knob.
1.
Select the temperature or grill power level with the
2.
temperature control knob.
The oven will begin to heat up.
Setting the time functions
This oven has various time functions. The
the menu and moves through the different functions. The time
symbols remain lit up while settings are programmed. The
square brackets [ ] indicate the time function selected. You can
modify an already programmed time function directly with the
sensors
or
, provided the time symbol is situated between
@
A
square brackets [ ].
Timer
The timer works independently of the oven. The timer has its
own beep. This can be used to distinguish whether the time set
for the timer or the automatic oven shut-off have finished
(cooking time).
Press the button once
0
1.
The time symbols light up on the display panel, the square
brackets are next to
.
U
Set the timer using the
@
2.
Value suggested for the
@
Value suggested for the
A
The programmed time is shown after a few seconds. The time
set for the timer starts to count down. The symbol [
on the display panel and the timer's progress is shown. The
other time symbols switch off.
8
%
at 190 ºC.
sensor activates
0
.
or
buttons.
A
button = 10 minutes.
button = 5 minutes.
U
] lights up
Switching off the oven
Turn the function selector to the off position.
Changing the settings
The type of heating and temperature or grill setting can be
changed at any time using their respective selectors.
Rapid heating
With the rapid heating function, the oven reaches the
programmed temperature very quickly.
Rapid heating must be used for temperatures of more than
100 ºC. The following types of heating are appropriate:
3D hot air
<
■
Top and bottom heating
■
To ensure uniform cooking, the food must not be put into the
oven until rapid heating has been completed.
Select the temperature and type of heating required.
1.
Briefly press the
c
button.
2.
The display panel shows the
heat up.
End of rapid heating
A beep will sound. The
c
panel. Put the food in the oven.
Cancelling rapid heating
Press the
c
button. The
c
display panel.
The time set for the timer has elapsed
A beep will sound. The display panel will show
off the timer using the
0
button.
Changing the time on the timer.
Change the time set for the timer using the
new time is shown after a few seconds.
Cancelling the timer
Resetting the timer to
:
‹‹
‹‹
is shown after a few seconds. The timer switches off.
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel. The symbol for the time
function in the foreground is in brackets.
To view the timer
U
, the cooking time
the actual time
, press the
0
brackets are around the required symbol. The corresponding
value will be shown for a few seconds on the display panel.
%
symbol. The oven will begin to
c
symbol disappears from the display
symbol disappears from the
:
‹‹
‹‹
or
buttons. The
@
A
with the button
. The new time
A
r
, the end time
sensor repeatedly until the
0
. Switch
p
or
Advertisement
Table of Contents
