4. Repeatedly press /
correct minute. To rapidly advance the minutes, hold
down /
MINUTE
5. When the display shows the correct alarm time, either:
• Press
onds then appears steadily
• Wait for about 10 seconds until the newly set alarm
time stops flashing.
then the currently set time appears
Turning the Alarm On/Off
To turn on the alarm, press
At the preset alarm time, the alarm sounds for about 10 min-
utes, or until you press
leaves the alarm set to sound again the next day at the set
time.
To turn off the alarm completely so it will not sound the next
day, press
ON/OFF
26
MINUTE
.
(illus)
The currently set time flashes for 10 sec-
MODE.
STOP
so
disappears from the display.
AL
until the display shows the
or
,
AL
disappears from the display,
once.
ON/OFF
. This stops the alarm beep, but
.
AL
appears.