Pc With Usb Port - D-Link DSL-2520U Quick Installation Manual

DSL-2520U

PC with USB Port

!
Do not connect your router to your PC until the USB driver is installed.
1. Turn on your computer and wait until the operating system is completely
loaded. Insert the CD from the router's delivery package into the CD
ROM drive. Open the disk and go to the USBDriver folder, then run the
setup.exe file. Wait until the USB driver is installed. When the
installation is completed, click the Finish button.
2. Connect a phone cable between the DSL port of the router and the ADSL
OUT port of the splitter. Connect your phone to the PHONE port of the
splitter. Then connect another phone cable between a phone jack and the
ADSL IN port of the splitter.
3. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
4. Connect the USB cable between the USB port located on the back panel
of the router and the USB port of your PC.
Quick Installation Guide
4