JVC KD-SC601 Servise Manual page 8

QQ
3.1.4 Removing the side panel 3 7 63 1515 0
(See Fig.5)
• Prior to performing the following procedure, remove the front
panel assembly as required.
(1) Remove the screw C and two screws D attaching the side
panel on the left side of the main body, and remove the side
panel.
3.1.5 Removing the rear bracket
(See Fig.6)
• Prior to performing the following procedure, remove the bottom
cover.
(1) Remove the three screws E, screw F and three screws G
attaching the rear bracket on the back side of the main
body.
Reference:
During reassembly, before fixing the rear bracket onto the
main body, inserts the steering remote cable and sub-cable
into the slot.(KD-SC601 E/EX)
TE
L 13942296513
3.1.6 Removing the main board
(See Fig.7)
• Prior to performing the following procedure, remove the front
panel assembly, bottom cover, front chassis assembly and
side panel.
• Remove the rear bracket as required.
(1) Remove the two screws H attaching the main board.
(2) Disconnect the connector
board.
www
.
1-8 (No.MA035)
http://www.xiaoyu163.com
CN501 and remove the main
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
D C
Side panel
E
Rear bracket
Q Q
3 6 7 1 3 1 5
Insert the steering
remote cable
into the slot.
CN501
H
co
.
9 4 2 8
D
Fig.5
G F G
G
E
0 5 8 2 9 9 4 2 8
Insert the sub-cable
into the slot.
Fig.6
Main board
H
m
Fig.7
9 9
9 9