Transporting Cleaner; Power Cord Storage - Bissell 1305 series User Manual

Operations

Transporting Cleaner

1. The cleaner can be moved by using the carry
handle –or–
2. With the vacuum in the upright position,
tilt the cleaner back on its rear wheels and
push forward.
Variable Suction
To decrease the amount of suction to clean
delicate carpets, curtains or area rugs, twist the
variable suction valve counter clockwise. .
NOTE: the vacuum will come with the variable
suction valve closed for full suction power.

Power cord storage

When you are done using your vacuum, return it
to the upright position and store the power cord.
1. Turn vacuum cleaner off.
2. Unplug power cord by grasping the plug
(not the cord) and disconnect from outlet.
3. Loop the power cord around cord wraps.
4. Clip molded plug to power cord to secure.
www.BISSELL.com
6
CAUTION
Always place vacuum cleaner on floor in its fully
upright position and make sure it is locked into
place. Placing the vacuum in its full upright
position automatically stops the rotating brush.
ATTENTION
Some frieze carpets have long delicate fibers or
threads that may be damaged by the rotating
brush during vacuuming. It is recommended
the rotating brush be turned OFF when cleaning
this type of carpet.
Tip
» Before cleaning under low furniture, check area
first for objects that might harm the unit or block
the vacuum hose.
NOTICE:
While vacuuming, certain carpets and low
humidity conditions may generate small
static discharges. The discharges are entirely
harmless and are not associated in any way
with the main power supply.