Tuning Into A Station; Storing Stations Or Calling Stored Stations; Scanning Stations; Storing Stations Automatically (Travelstore) - Blaupunkt barcelona 230 Operating And Installation Instructions

Radio mode

Tuning into a station

There are various ways of tuning into a station:
Tuning into stations manually
u Briefl y press the
several times to change the frequency in in-
crements, or long to quickly change the fre-
quency.
Starting station seek tuning
u Briefl y press the
tion seek tuning.
The radio tunes into the next receivable
station.
Notes:
• For the reception area "EUROPE": If the
priority for traffi c information is activated
( ), only traffi c information stations are
tuned into.
• The sensitivity of seek tuning can be ad-
justed (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "SEEK SENS").
Storing stations or calling stored
stations
u Select the desired memory bank.
u If necessary, set the desired station.
u Press the station button 1 - 5
2 seconds to store the current station under
the button.
- or -
u Briefl y press the station button 1 - 5
up the stored station.

Scanning stations

With the scan function, you can scan either every
receivable station or the stored stations of the cur-
rent waveband.
Note:
You can adjust the scan time for each sta-
tion (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu",
menu item "SCAN TIME").
8
7
/ button once or
7
/ button to start sta-
=
for approx.
=
to call
Scanning receivable stations
u Press the MENU button
onds to start scanning.
During the scan, the display alternately dis-
plays "SCAN" and the current frequency as
well as memory bank or station name.
u Briefl y press the MENU button
tinue listening to the station that is currently
being received.
Scanning stored stations
u Press the
/ button
onds to start scanning.
During the scan, the display shows the mem-
ory location and the current frequency or sta-
tion name.
u Briefl y press the
listening to the station that is currently being
scanned.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for
and store the 5 FM stations off ering the strongest
reception in the region in the FMT memory bank.
Any previously stored stations in this memory
bank are deleted in the process.
u Press the SRC button
onds.
The tuner starts the automatic station seek
tuning; the display shows "FM TSTORE". After
the storing is completed, the radio plays the
station at memory location 1 of the FMT level.
Notes:
• For the reception area "EUROPE": If the
priority for traffi c information is switched
on ( ), only traffi c information stations
are stored.
• If the FMT memory bank is deactivated
(see the chapter "User settings", section
"Making settings in the "TUNER" menu",
menu item "BANDS" (band selection)), it is
automatically reactivated if you initiate the
Travelstore function.
2
for approx. 2 sec-
2
to con-
7
for approx. 2 sec-
7
/ button to continue
?
for approx. 2 sec-