Vivotek IB8367A User Manual page 273

begintime
endtime
Group: vadp_event
NAME
ntrigger
triggerlist_i<0~(n-1)>_to
pic
7.38 camera PTZ control
Group: camctrl (capability.camctrl.ptztunnel > 0)
NAME
enableptztunnel
Group: camctrl_c<0~(n-1)> for n channel products
n denotes the value of "capability_nvideoin"
NAME
panspeed
tiltspeed
zoomspeed
focusspeed
patrolseq
patroldwelling
preset_i<0~(capability_n
preset -1)>_name
preset_i<0~(capability_n
preset -1)>_ dwelling
uart
hh:mm 6/6
hh:mm 6/6
VALUE SECURITY
(get/set)
0,<positive integer> 6/7
string[256] 6/6
VALUE SECURITY
(get/set)
<boolean> 1/4
VALUE SECURITY
(get/set)
-5 ~ 5 1/4
-5 ~ 5 1/4
-5 ~ 5 1/4
-5 ~ 5 1/4
string[120] 1/4
string[160] 1/4
string[40] 1/4
0 ~ 999 1/4
0 ~ 1/4
(capability_nuart -1)
control the execution of the VADP package
Begin time of the schedule
End time of the schedule
DESCRIPTION
Indicate the number of topics to be transferred
to event manager for trigger.
Indicate the event notification with this topic
will be transferred to event manager as trigger.
n is equal to ntrigger above.
DESCRIPTION
Enable PTZ tunnel for camera control.
(capability.ptzenabled > 0)
DESCRIPTION
Pan speed
Tilt speed
Zoom speed
Auto focus speed
(For external device)
The indexes of patrol points, separated by ","
(For external device)
The dwelling time of each patrol point,
separated by ","
Name of the preset location.
The dwelling time of each preset location
Select corresponding uart
(capability.nuart>0).
VIVOTEK
User's Manual - 273