Vivotek IB8367A User Manual page 188

VIVOTEK
scene_mode
<product dependent>
restoreatwb
freeze
<product dependent>
profile_i<0~(m-1)>_enable
profile_i<0~(m-1)>_policy
profile_i<0~(m-1)>_begintime
profile_i<0~(m-1)>_endtime
profile_i<0~(m-1)>_brightness
<Not recommended to use this>
profile_i<0~(m-1)>_contrast
<Not recommended to use this>
188 - User's Manual
visibility, 4/4
noiseless,
lpcparkinglot,
lpcstreet
<product
dependent>
1~ 4/4
<boolean> 4/4
<boolean> 4/4
night, 4/4
schedule
hh:mm 4/4
hh:mm 4/4
-5~5,100 4/4
-5~5,100 4/4
1: enable
* Only available when
"capability_image_c<n>_scenemode_support
" is 1
Value of scene mode
* Only available when
"capability_image_c<n>_scenemode_support
" is 1
* Available value is listed in
"capability_image_c<n>_scenemode_support
type"
Restore of adjusting white balance of image
according to mode settings
Enable/disable Image freeze while patrolling.
0: disable
1: enable
* Only available when
"capability_image_c<n>_freeze" is 1
Enable/disable this profile setting
The mode which the profile is applied to.
* Not support "policy=day" anymore when the
version number (httpversion) is equal or
greater than 0301a.
Begin time of schedule mode.
End time of schedule mode.
-5: Darker <-> 5: Bright
100: Use " image_c<n>_brightnesspercent"
* Only available when bit 0 of
"capability_image_c<n>_basicsetting" is 1
* We replace "profile_i0_brightness" with
"profile_i0_brightnesspercent".
* This parameter will not be used after the
version number (httpversion) is equal or
greater than 0400a.
-5: Less contrast <-> 5: More contrast
100: Use " image_c<n>_contrastpercent"