Assembly - Craftsman 315.115430 Operator's Manual

UNPAcKING
This product requires assembly.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PAcKING LIST
Hammer Drill with Auxiliary Handle Assembly
Bits (2)
Operator's Manual
WARNING:
If any parts are missing do not operate
this tool until the missing parts are replaced. Failure
to do so could result in possible serious personal
injury.
SCREW

ASSEMBLy

WARNING:
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
ASSEMBLING AUXILIARy HANDLE
See Figure 2.
An auxiliary handle is packed with the drill for ease of
operation and to help prevent loss of control.
 Insert and push screw all the way through slot on drill.
 Attach plate and auxiliary handle to screw and tighten.
 Insert end of depth stop rod into depth stop rod slot on
the back of the plate.
SLOT
9
Do not attempt to modify this tool
To prevent accidental starting that
DEPTH STOP ROD
AUXILIARY
PLATE
HANDLE
DEPTH STOP
SLOT
Fig. 2