Miele CS 1011 Operating And Installation Instructions page 52

Gas connection
This hob is a class 3 appliance and is
suitable for use with natural gas or li-
quid gas.
Category in acc. with EN 30
United Kingdom
GB II 2 H3 +20 mbar, 28-30/37 mbar
Ireland
IE II 2 H 3+20 mbar, 28-30/37 mbar
Depending on country of destination
this appliance is set up for connection
to natural or liquid gas. See adhesive la-
bel on the appliance.
Depending on country, a set of jets for
conversion to an alternative type of gas
may be included with the hob. Please
contact your supplier or Miele for the
appropriate conversion jets if neces-
sary. Conversion to another type of gas
is described under "Conversion to an-
other type of gas".
Connecting the hob
The hob is supplied with a conical ¹/₂"
gas connection point for connection to
one of the following:
– Rigid connection with isolation valve
– Flexible connection in accordance
with DIN 3383 Part 1, maximum
length 2000 mm. (Not for the UK!)
Connections must be sealed using
appropriate sealant. Other products
may not be leak-proof.
52
c Connection with test point specific-
ally for GB
d 90° bend
Connection with test point specific-
ally for GB and 90 ° bend.