Safety Instructions For Installation - Miele CS 1011 Operating And Installation Instructions

Safety instructions for installation

Fit the wall units and cooker hood before fitting the CombiSet to avoid dam-
aging it.

The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any backmoulds must be of heat-resistant
material.

The room in which the appliance is installed must be at least 20
3
m in size with a door or window in it which can be opened to the
outside air.

A deep fat fryer must not be installed directly next to a gas hob or
a wok burner as the gas flames could ignite the fat in the fryer. It is
essential to maintain a distance of at least 288 mm between these
two appliances.

The CombiSet must not be installed over a fridge, fridge-freezer,
freezer, dishwasher, washing machine, washer-dryer or tumble dryer.

When installing the CombiSet, make sure that the gas hose and
the electrical connection cable cannot come into contact with hot
appliance parts.

The electrical cable and any flexible gas connection pipes must be
installed in such a way so that they do not come into contact with
any moving kitchen parts (e.g. a drawer), and cannot become
trapped.

Observe carefully the safety clearances listed on the following
pages.
All dimensions are given in mm.
36