Deleting Presets; Displaying Information; Fm Mode; Tuner Operation With The Rc-613S Remote Controller (Supplied With The A-933) - Onkyo T-433 Instruction Manual

*En_T433_02.fm Page 19 Tuesday, February 15, 2005 3:09 PM
Listening to the Radio —Continued
Deleting All Characters in One Go
If Name Edit mode is not selected, follow steps 1 and 2
in the left column.
While holding down the [MEM-
ORY] button, press the [FM
CLEAR
MEMORY

FM MODE

MODE] button.
Note:
Make sure that Name Edit mode is
selected before doing this because if it
isn't, the current preset will be deleted
instead.

Deleting Presets

Individual presets can be deleted as follows.
1 Select the preset that you want to
delete.
See page 17 for selecting presets.
2
While holding down the [MEM-
ORY] button, press the [FM
CLEAR MODE] button.
MEMORY FM MODE
The preset number on the display
changes to "--" and the preset is
deleted.

Displaying Information

By pressing the T-433's [DISPLAY] button repeatedly,
you can view the tuning frequency, text (preset name or
RDS), or clock.
Frequency
DISPLAY
Text (preset name or RDS)
Clock
Notes:
• If the current preset doesn't have a name, no text will
be displayed.
• If the clock hasn't been set, the clock will not be dis-
played.
FM Mode
In places where the signal strength is
FM MODE
weak or reception is noisy, press the [FM
MODE] button to listen in mono (AUTO
indicator off). This will reduce the noise
and any break up in reception.
To return to stereo, press the [FM MODE]
button again (AUTO indicator on).
Tuner Operation with the RC-613S
Remote Controller
(supplied with the A-933)
Selecting FM or AM
These buttons can be
used to select FM or AM.
If the T-433 and A-933
are both on Standby,
pressing either of these
buttons will turn on the
T-433 and A-933.
Tuning Manually
Press the Down [ ]
button to decrease
the tuning frequency.
Press the Up [ ]
button to increase the
tuning frequency.
Selecting Radio Presets
Press the Down [ ] button
to select the previous preset.
Press the Up [ ] button to
select the next preset.
Displaying the Clock
Press the [CLOCK CALL]
button to display the clock.
Note:
If you're using a different Onkyo Separate Collection
amplifier's remote controller, refer to its instruction
manual for operating information.
ON STANDBY
1 2 3 4
5 6 7 8
9 10/0 >10 GROUP
FM AM CLEAR
CD
MD
TAPE /CDR
VOLUME
PRESET PRESET
MUTING
VOLUME SLEEP
TIMER
ENTER
INPUT
MEMORY REPEAT DISPLAY
RANDOM P MODE SCROLL
CLOCK
CALL
-613
R C S
19