Craftsman C950.672150 Operator's Manual page 9

4. Place accessory tray (A) over holes (B) on handle
(viewing from front of unit). Push the tree clips (C) into
the holes until they sit flat against the accessory tray.
5. Insert multi–colored quick connect spray tips and other
supplied accessories in spaces provided in accessory
tray. See How to Use Accessory Tray.
6. Attach bottle bracket (D) to handle with carriage bolt (E)
and black plastic knob (F). Tighten by hand.
D
E
PerfectMix™ Soap System
The pressure washer is equipped with a detergent siphoning
hose.
Attach PerfectMix™ Siphon to Pump
Attach the tube end of the blue PerfectMix™ Siphon (G) to
the barbed tube fitting (H) on the pump.
A
B
C
F
H
G
Attach PerfectMix™ Detergent Siphon to
Concentrate Bottle
Place PerfectMix™ bottle (not included) in the wire-form
bracket on the handle. Remove cap from bottle and insert the
PerfectMix™ Siphon (J). Screw the siphon unit to the top of
the bottle (K). Use the clip on the cap (J) to snap siphon to
wire form bracket when siphon is not in a concentrate bottle.
K
Add Engine Oil
1. Place pressure washer on a flat, level surface.
2. Clean area around oil fill and remove oil fill cap /dipstick.
3. Using oil funnel (optional), slowly pour contents of
supplied oil into oil fill opening, frequently checking oil
level. DO NOT OVERFILL.
NOTICE Improper treatment of pressure washer could
damage it and shorten its life.
• DO NOT attempt to crank or start the engine before it has been
properly serviced with the recommended oil. This could result in
an engine failure.
4. Replace oil fill cap/dipstick and fully tighten.
9
J