Toro 23518 Operator's Manual page 7

DANGER
Charging or jump starting the battery may
produce explosive gases. Battery gases can
explode causing serious injury.
– Keep sparks, flames, or cigarettes away from
battery.
– Ventilate when charging or using battery in
an enclosed space.
– Make sure venting path of battery is always
open once battery is filled with acid.
– Always shield eyes and face from battery.
DANGER
Battery electrolyte contains sulfuric acid, which
is poisonous and can cause severe burns.
Swallowing electrolyte can be fatal or if it
touches skin can cause severe burns.
– Wear safety glasses to shield eyes, and rubber
gloves to protect skin and clothing when
handling electrolyte.
– Do not swallow electrolyte.
– In the event of an accident, flush with water
and call a doctor immediately.
CAUTION
If the ignition is in the On position there
is potential for sparks and engagement of
components. Sparks could cause an explosion or
moving parts could accidentally engage causing
personal injury.
Be sure ignition switch is in the Off position
before charging the battery.
•
Keep all guards, shields and all safety devices in place and
in safe working condition.
•
Check all bolts frequently to maintain proper tightness.
•
Frequently check for worn or deteriorating components
that could create a hazard.
WARNING
Removing standard original equipment parts and
accessories may alter the warranty, traction, and
safety of the machine. Failure to use original Toro
parts could cause serious injury or death. Making
unauthorized changes to the engine, fuel or venting
system, may violate EPA and CARB regulations.
Replace all parts including, but not limited to,
tires, belts, tines, and fuel system components with
original Toro parts.
WARNING
Hydraulic fluid escaping under pressure can
penetrate skin and cause injury. Fluid accidentally
injected into the skin must be surgically removed
within a few hours by a doctor familiar with this
form of injury or gangrene may result.
• If equipped, make sure all hydraulic fluid
hoses and lines are in good condition and all
hydraulic connections and fittings are tight
before applying pressure to hydraulic system.
• Keep body and hands away from pinhole leaks or
nozzles that eject high pressure hydraulic fluid.
• Use cardboard or paper, not your hands, to find
hydraulic leaks.
• Before performing any work on the hydraulic
system:
– Safely relieve all pressure in the ground drive
hydraulic system by placing the motion control
levers in neutral and shutting off the engine.
– Safely relieve all pressure in the auxiliary
hydraulic system by shutting off the engine,
turning the ignition switch to the On position,
and pressing the tine ground engagement
switch. Once the tines have lowered to the
ground, release the tine ground engagement
switch and turn the ignition switch to the Off
position.
7