Toro Riding Mower Safety - Toro 74731 Operator's Manual

•
Check for proper brake operation frequently. Adjust and
service as required.
•
Maintain or replace safety and instruction decals as
necessary.
•
Use only genuine Toro replacement parts to ensure that
original standards are maintained.

Toro Riding Mower Safety

The following list contains safety information specific to Toro
products or other safety information that you must know that
may not be included in the ANSI standards.
•
Stop the engine, move the motion-control levers to
neutral and outward to the P
blade-control switch, remove key before and disconnect
spark plug wire(s) performing any service, repairs,
maintenance or adjustments.
•
Keep hands, feet, hair, and loose clothing away from
attachment discharge area, underside of mower and any
moving parts while engine is running.
•
Do not touch equipment or attachment parts which may
be hot from operation. Allow to cool before attempting
to maintain, adjust or service.
•
Battery acid is poisonous and can cause burns. Avoid
contact with skin, eyes, and clothing. Protect your face,
eyes, and clothing when working with a battery.
•
Battery gases can explode. Keep cigarettes, sparks and
flames away from battery.
•
If loading the machine onto a trailer or truck, use a single,
full-width ramp only. The ramp angle should not exceed
15 degrees.
•
Removing standard original equipment parts and
accessories may alter the warranty, traction, and safety
of the machine. Failure to use original Toro parts could
cause serious injury or death. Making unauthorized
changes to the engine, fuel or venting system, may violate
EPA and CARB regulations.
•
Replace all parts including, but not limited to, tires, belts,
blades, and fuel system components with original Toro
parts.
position, disengage the
ARK
6