Disassembly Instructions; Removal Of Mechanical Parts And P.c. Boards - Toshiba MW20F51 Service Manual

1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: BACK CABINET (Refer to Fig. 1-1)
Remove the 6 screws 1.
1.
Remove the 2 screws 2.
2.
3. Remove the Back Cabinet in the direction of arrow.
Front Cabinet
1
1
1
2
2
1-2: CRT PCB (Refer to Fig. 1-2)
CAUTION: BEFORE REMOVING THE ANODE CAP,
DISCHARGE ELECTRICITY BECAUSE IT
CONTAINS HIGH VOLTAGE.
BEFORE ATTEMPTING TO REMOVE OR
REPAIR ANY PCB, UNPLUG THE POWER
CORD FROM THE AC SOURCE.
1. Remove the Anode Cap.
(Refer to REMOVAL OF ANODE CAP)
2. Disconnect the following connectors:
(CP603B, CP803 and CP805).
3. Remove the CRT PCB in the direction of arrow.
Front Cabinet

DISASSEMBLY INSTRUCTIONS

1
1
Back Cabinet
1
Fig. 1-1
CRT PCB
CP805
CP603B
CP803
Fig. 1-2
1-3: TV/DVD/VCR BLOCK (Refer to Fig. 1-3)
Remove the 2 screws 1.
1.
2. Disconnect the following connectors:
(CP303, CP404, CP1704 and CP9604).
3. Remove the TV/DVD/VCR Block in the direction of arrow.
Front Cabinet
1-4: MEMORY CARD PCB (Refer to Fig. 1-4)
Remove the screw 1.
1.
2. Remove the Shield Card 2.
Remove the 4 screws 2.
3.
4. Remove the Memory Card PCB in the direction of arrow.
Front Cabinet
B1-1
1
CP1704
CP303 1
CP404
TV/DVD/VCR Block
CP9604
Fig. 1-3
Shield Card 2
1
2
2
2
2
Memory Card PCB
Fig. 1-4