System - D-Link DCS-5222L User Manual

Section 4 - Configuration
This screen allows you to save and restore the camera's current configuration. You can also reset all settings to factory default or reboot the device.
Save to Local Hard Click on the Save Configuration button to save
Drive:
the current configuration to your hard drive.
Load from Local
To load a saved configuration, click on the Browse
Hard Drive:
button to select a configuration file from your
hard drive. Then, click the Load Configuration
button to load the new configuration.
Restore to Factory
Click this button to reset all settings to their
Defaults:
factory defaults. If you reset your settings, you
will need to set up your camera again.
Reboot Device: Clicking the Reboot button will reboot your
device.
D-Link DCS-5222L User Manual

System

57