Toro 30635 Operator's Manual page 22

Settings
About
Service
Menu Item
Hours
Counts
Diagnostics
Menu Item
Engine Run
Glowplugs
Fan
Settings
Menu Item
Units
Language
LCD Backlight
LCD Contrast
Protected Menus
Auto Idle
Mow Speed
The Settings menu allows
you to customize and modify
configuration variables on the
InfoCenter display.
The About menu lists the
model number, serial number,
and software version of your
machine.
Description
Lists the total number of hours
that the machine, engine and
fan have been on, as well
as the number of hours the
machine has been transported
and overheated.
Lists the number of preheats
and starts the machine has
experienced.
Description
Refer to the Service
Manual or your Authorized
Toro Distributor for more
information on the Engine
Run menu and the information
contained there.
Indicates if the following items
are active: Key start, timeout
limited, and glowplugs.
Indicates if the fan is active
in the following instances:
Engine high temp, oil high
temp, engine or hydraulic high
temp, and fan on.
Description
Controls the units used on the
InfoCenter. The menu choices
are English or Metric
Controls the language used
on the InfoCenter*.
Controls the brightness of the
LCD display.
Controls the contrast of the
LCD display.
Allows the distributor/engineer
to access protected menus by
inputting a passcode.
Controls the time that before
idling the engine when the
machine not in use.
Controls the maximum speed
while in mow (low range).
Trans Speed
Smart Power
* Only "operator-faced" text is translated. Faults, Service, and
Diagnostics screens are "service-faced". Titles will be in the
selected language, but menu items are in English.
About
Menu Item
Model
SN
Machine Controller Revision
InfoCenter Revision
CAN Bus
Protected Menus
There are 4 operating configuration settings that are adjustable
within the Settings Menu of the InfoCenter: auto idle time
delay, maximum mowing ground speed, maximum transport
ground speed, and Smart Power. These settings are in the
Protected Menu.
Accessing the Protected Menu Settings
To access the Protected Menu Settings
•
From the Main Menu, scroll down to the Settings Menu
and press the right button.
•
In the Settings Menu, scroll down to the Protected Menu
and press the right button.
•
To enter the passcode, use the center button to set the
first digit then press the right button to move on to the
next digit.
•
Use the center button to set the second digit then press
the right button to move on to the next digit.
•
Use the center button to set the third digit then press the
right button to move on to the next digit.
•
Use the center button to set the fourth digit then press
the right button.
•
Press the middle button to enter the code.
The ability to view and change the settings in the Protected
Menu can be changed. Once the Protected Menu has been
accessed, scroll down to Protect Settings. Using the right
button, changing Protect Settings to Off will allow the ability
to view and change the settings in the Protected Menu
without entering the passcode. Changing Protect Settings to
22
Controls the maximum speed
while in transport (high range).
Smart Power prevents
bogging down in heavy turf by
automatically controlling the
machine speed and optimizing
cutting performance.
Description
Lists the model number of the
machine.
Lists the serial number of the
machine.
Lists the software revision of
the master controller.
Lists the software revision of
the InfoCenter.
Lists the machine
communication bus status.