Indicators And Projector Condition - Sanyo PLC-XF47 Owner's Manual

Appendix

Indicators and Projector Condition

Check the indicators for the projector condition.
The projector is operating normally .
Indicators
LAMP READY
red green
• • • on
• • • dim
• • • off
✽
6
Downloaded From projector-manual.com Sanyo Manuals
WARNING LAMP
TEMP . REPLACE
red orange
The projector is off. (The main switch is OFF position or the AC power
cord is unplugged.)
The projector is in stand-by mode. Press the ON/STAND-BY button to
✽
turn on the projector.
✽
The projector is operating normally.
The projector is preparing for stand-by or the projection lamp is
✽
being cooled down. The projector cannot be turned on until cooling is
completed and the READY indicator lights green.
✽
The projector is in the Power management mode.
• • • blinking at the normal rate
• • • blinking fast
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights orange.
When this lights orange, replace the projection lamp a new one promptly. Reset the lamp
counter after replacing the lamp (
Projector Condition
(approx. 1 second ON,
1 second OFF)
(approx. 0.5 seconds ON,
0.5 seconds OFF)
p.57)
• • • blinking slow
(approx. 2 seconds ON,
2 seconds OFF)