Resetting The Lamp Counter - Sanyo PLC-XF47 Owner's Manual

Maintenance and Care

Resetting the Lamp Counter

Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP
REPLACE indicator stops lighting and the Lamp replacement icon disappears.
1
Press the MENU button to display the On-Screen Menu.
Use the Point 7 8 buttons to move the red frame pointer
to the Setting Menu icon
2
Use the Point ed buttons to move the red frame pointer
to Lamp counter and then press the SELECT button.
A dialog box appears. Select a lamp and the "Lamp
replacement counter Reset?" appears. Select [Yes] to
continue.
3
Another confirmation dialog box appears and select [Yes]
to reset the Lamp counter.
✔ Note:
• Do not reset the Lamp counter without replacing the lamp. Be
sure to reset the Lamp counter only after replacing the lamp.
ORDER REPLACEMENT LAMP
Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the
following information to the dealer.
Model No . of your projector
●
Replacement Lamp Type No .
●
5
Downloaded From projector-manual.com Sanyo Manuals
Lamp counter
: PLC-XF47/PLC-XF47K
: POA-LMP109
(Service Parts No. 610 334 6267)
Select a lamp and the "Lamp
replacement counter Reset?"
appears.
Select [Yes], then another
confirmation box appears.
Select [Yes] again
to reset the lamp
counter.