Speaker Package - Onkyo HT-S5300 Instruction Manual

Speaker Package

Subwoofer (SKW-580)
For detailed information, see the pages in parentheses.
■
Front
a STANDBY/ON indicator
Red: Subwoofer in standby mode
Blue: Subwoofer on
With the Auto Standby function, the SKW-580 auto-
matically turns on when an input signal is detected in
Standby mode. When there's no input signal for a
while, the SKW-580 automatically enters Standby
mode.
b OUTPUT LEVEL control
This control is used to adjust the volume of the sub-
woofer.
c LINE INPUT
(➔ 13)
This RCA input should be connected to the subwoofer
pre out on the AV receiver with supplied RCA cable.
Front, Center, Surround and Surround Back Speakers
(SKF-580, SKC-580, SKR-580, SKB-580)
SKF-580
Front
a Keyhole slots
These keyhole slots can be used to wall-mount the
speaker. See "Wall Mounting" for mounting instruc-
tions (➔ 14).
b Speaker terminals
These push terminals are for connecting the speaker to
the HT-R580 with the supplied speaker cables.
The supplied speaker cables are color-coded for easy
identification. Simply connect each cable to the same-
colored positive speaker terminal.
Caution
• The front grilles are not designed to be removed so do
not attempt to remove them forcibly, as this will damage
them.
a
21, 22)
(➔
a
b
Rear
■
Rear
(North American models)
To AC outlet b c
(Asian models)
b c
To AC outlet
Note
• The Auto Standby function turns the subwoofer on when the
input signal exceeds a certain level. If the Auto Standby function
does not work reliably, try slightly increasing or decreasing the
subwoofer output level on the AV receiver
SKR-580/SKB-580
Front
SKC-580
Front
(➔ 36).
a
b
Rear
a b
Rear
En
9