Download Print this page

Onkyo Home Entertainment System Brochure & Specs page 6

Thx ultra2 certified 7.1-channel a/v home network receiver

Advertisement

TX-NR5000E
The lesser-used controls are neatly tucked away behind the drop-down panel.
As Onkyo's only module-based home network receiver, the THX Ultra2 certified TX-NR5000E gives you the freedom to configure your home theater
exactly as you wish. It's also the most powerful Onkyo receiver ever built, courtesy of its massive shielded toroidal transformer and high-capacity, low-
ESR filter capacitors.That's enough power to drive a large home theater connected to multiple A/V sources with an advanced display or projector.You
can even assign 7.1-channel set-ups in two different rooms for two independent home theater environments. HDMI and i.LINK ports carry high-
resolution, high-bandwidth digital video and audio signals.These transports are ably supported by digital and multichannel analog inputs to handle all
surround sound formats, including Dolby
processor to distribute digital music files on your PC—or internet radio—to up to 11 clients on the same network.
• 250 W/Ch, Continuous 6
, 1 kHz, 1 Channel Driven, IEC
• THX
Ultra2
Certified (with THX Processing)
• THX
Surround EX
, DTS
®
-ES
Discrete/Matrix, DTS
DTS
®
96/24, Dolby
®
Digital EX
, Dolby
Headphone, Dolby
®
Virtual Speaker
• VLSC (Vector Linear Shaping Circuitry)
• WRAT (Wide Range Amplifier Technology)
• Net-Tune
Function with MP3/WMA/WAV Playback
• Ethernet Cable Plug-in Capability*
• 2 HDMI Inputs and 1 Output
• 4 Component Video Inputs (3 RCA/1 BNC) and
2 Outputs (RCA/BNC)
• HDMI and Component Video Upconversion
• Time Base Corrector (TBC) for Upconversion
6
Home Theater Components
THX
Ultra2
®
True HD and DTS-HD
• HDTV-Capable HDMI and Component Video Switching (100 MHz)
• 2 i.LINK Digital Ports
®
Neo:6,
• Speaker A and B Mode for 7.1 Channels
®
Pro Logic
®
IIx, Dolby
®
• BTL and Bi-Wiring Connectable for FL/FR with SBL/SBR
• Dual 32-Bit Processing DSP Chips
• 192 kHz/24-Bit DACs for All Channels
• Powered Zone 2 and Zone 3 (Audio and Video)
• 5 12V Trigger Outputs and 3 IR Inputs and Outputs
• Bi-Directional RS232 Port for Interface Control
• 2 Sets of Color-Coded Heavy-Duty Dual Banana Plug-
Compatible Transparent Speaker Posts
• Color-Coded 7.1 Multichannel Inputs (Receive 7.1 Surround
Sound from Compatible Blu-ray Disc and HD DVD Players)
and Pre Outs
Certified 7.1-Channel A/V Home Network Receiver
®
Master Audio. Also, an Ethernet port enables Onkyo's exclusive Net-Tune client
(April Issue 2005)
SILVER
BLACK
• A/V Sync Control Function (Up to 300 ms)
• Elegant Aluminum-Faced RI (Remote Interactive) Remote
Control with Scroll Wheel and LCD Display
*For copyright protection purposes, it is not possible to make a digital output
signal from Ethernet input signals.
RF-EX6
RF Receiver for TX-NR5000E
• RF Receiver for Use with Onkyo RF-Capable Remote Controller
• Allows Your RF Remote to Control Your Devices by Radio Frequency
• Up to 16 Units in One System
• Integrated IR-Blaster
• 4 Outputs for IR-Emitters
• Range up to 30 m
• 4 Selectable Channels
• Easy Installation
• For Top Mounting and Stand Alone

Advertisement

loading

This manual is also suitable for:

Tx-nr5000eTx-nr905Tx-sr875