Table of Contents
Advertisement
Switch Off Timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch Off Timer ...
1 - Press SETTINGS, select All Settings and
press OK.
2 - Select Eco Settings and press OK.
3 - Select Switch Off Timer and press (right).
4 - Press (up) or (down) to adjust the value.
The value 0 (Off) deactivates the automatic switch
off.
5 - Press (left) to go back one step or press
BACK to close the menu.
22.6
General Settings
Philips Logo Brightness
You can switch off or adjust the brightness of the
Philips logo on the front of the TV.
To adjust or switch off...
1 - Press SETTINGS, select All Settings and
press OK.
2 - Select General Settings and press OK.
3 - Select Philips Logo Brightness and press OK.
4 - Select Maximum, Medium, Minimum or Off and
press OK.
5 - Press (left) to go back one step or press
BACK to close the menu.
Home or Shop
If you use the TV at home, set the location to Home. If
you use the TV in a shop, set the location to Shop. In
location Shop, the Picture Style is set to Vivid
automatically. The automatic Switch Off Timer is
switched off.
To set the TV location...
1 - Press SETTINGS, select All Settings and
press OK.
2 - Select General Settings and press OK.
3 - Select Location and press OK.
4 - Select Home or Shop and press OK.
5 - Press (left) to go back one step or press
BACK to close the menu.
Shop Setup
If the TV is set to Shop, some settings were set
automatically. You can change these shop settings in
Shop Setup.
To set the Shop Setup...
1 - Press SETTINGS, select All Settings and
press OK.
2 - Select General Settings and press OK.
3 - Select Shop Setup and press OK.
4 - Change the settings according to your
preference.
5 - Press (left) to go back one step or press
BACK to close the menu.
Demo Me
To present the picture and sound quality of this TV,
you can play a stored video clip.
To play the demonstration video clip...
1 - Press .
2 - Select Demo Me and press OK. The video clip will
start playing.
You can use this video clip to check on the picture
and sound quality of the TV. The TV switches to the
factory settings when playing the video clip.
EasyLink
In Help, press the colour key
up EasyLink for more information on EasyLink.
Advanced
TV Guide Data
In Help, press the colour key
up TV Guide Data for more information.
Channel Logos
In some countries, the TV can show the channel
logos.
If you do not want these logos to appear, you can
switch them off.
To switch off the logos...
1 - Press SETTINGS, select All Settings and press
OK.
2 - Select General Settings and press OK.
3 - Select Advanced > Channel Logos and press OK.
74
Keywords and look
Keywords and look
Advertisement
Table of Contents
