Table of Contents
Advertisement
4.4.6 WDS
When selected in the Basic Settings page and enabled here, Wireless Distribution System
(WDS) enables the router to be used as a wireless bridge. Two Wireless-N Routers in
bridge mode can communicate with each other through their wireless interfaces. To
accomplish this, all wireless routers should be set to the same channel and the MAC
address of other AP / Routers should be entered in the table.
The WDS explanation is as the following picture
Router_A：
a Set the connection mode to "AP+WDS" from "Wireless Basic Setting", and then
select the channel number (in this example is "11"). Click Apply Changes to save
the setting.
Advertisement
Table of Contents
