Setting Lock; Setting Up The Administrator Password - Brother DCP-9020CDN Advanced User's Manual

Chapter 2
Changing to the Public mode
a
Press .
b
Press Go to Public.
NOTE
• After a restricted user has finished using
the machine, it will return to Public mode
after one minute.
• If the function you want is restricted for all
users, Access Denied will appear on
the Touchscreen and the machine will go
back to the Ready mode. Contact your
administrator to check your Secure
Function Lock Settings.
• If your ID has set Color Print restrictions to
Disable, the Touchscreen will show
No Permission when you try to print
coloured data. The machine prints the
data in monochrome only.
10

Setting Lock

2
Setting Lock lets you set a password to stop
other people from accidentally changing your
machine settings.
Make a careful note of your password. If you
forget it, you will have to reset the passwords
stored in the machine. Contact your
administrator or Brother customer service.
While the Setting Lock is On, you cannot
access the machine settings.
Setting up the administrator
password
a
Press
b
Press All Settings.
c
Swipe up or down, or press a or b to
display General Setup.
d
Press General Setup.
e
Swipe up or down, or press a or b to
display Security.
f
Press Security.
g
Press Setting Lock.
h
Enter a four-digit number for the
password using the keyboard on the
Touchscreen.
Press OK.
i
Enter the password again when the
Touchscreen shows Verify:.
Press OK.
j
Press .
.
2
2