Nikon COOLPIX P7700 User Manual page 98

Features Not Available in Combination
Restricted function
ISO sensitivity
White balance
Picture Control
Metering
Continuous/
Auto bracketing
AF area mode
80
Setting
• If ISO sensitivity is set to Auto when Shooting
Shooting mode of
mode is Manual, ISO sensitivity is fixed at ISO 80.
movie custom
• When Shooting mode is Special effects, ISO
setting (A108)
sensitivity is switched to Auto.
Picture Control When Monochrome is selected for shooting, White
balance is fixed at Auto (normal).
(A68)
Active D-Lighting When using Active D-Lighting for shooting, Contrast
in manual adjustment cannot be adjusted.
(A72)
Shooting mode of When Shooting mode is Special effects, Picture
Control is not available.
movie custom
setting (A108)
Active D-Lighting Metering is reset to Matrix when Active D-Lighting is
set to any mode other than Off.
(A72)
Continuous and Auto bracketing are not available
Continuous
simultaneously.
(A71)/Auto
Auto bracketing is reset to OFF when Continuous is
set to any mode other than Single. The setting for
bracketing
Continuous is reset to Single when Auto bracketing
(A68)
is set to any mode other than OFF.
Continuous H, Continuous M, Continuous L, or BSS
Self-timer
and self-timer/remote control are not available
(A59)/Remote
simultaneously. When self-timer or remote control is set,
control(A55)
a single picture is shot.
When the camera detects smiling faces and the shutter is
Smile timer released, only one picture is shot. If Intvl timer
shooting is set, shooting finishes automatically after one
(A60)
picture is shot.
BSS, Multi-shot 16, Continuous H: 120 fps,
Image quality Continuous H: 60 fps or White balance bracketing
cannot be used when Image quality is set to NRW
(A75)
(RAW), NRW (RAW) + Fine or NRW (RAW) + Normal.
Picture Control When Monochrome is selected for shooting, White
balance bracketing is not available.
(A68)
Smile timer
The camera takes a picture using face detection
regardless of the applied AF area mode option.
(A60)
When set to E (manual focus), the AF area mode
Focus mode
(A62)
cannot be set.
When Target finding AF is selected and Picture
Picture Control
Control is set to Monochrome, AF area mode
(A68)
operates using the Auto setting.
When Target finding AF is selected, and if the white
balance is set to Preset manual, Incandescent, FL3 in
White balance
Fluorescent or Choose color temp., or fine adjustment
(A68)
of each white balance setting is performed, AF area
mode operates using the Auto setting.
Description