Television; Advanced Operation; Controlling Colour & Brightness; Scan - One for All ZAPPER URC-6010 Manual

Controlling Colour & Brightness
Depending on the functions of your original remote control, the ZAPPER
can operate the colour and brightness settings of your Television.
Colour up
Colour down
Brightness up
Brightness down =
Note: You have 5 seconds to press the Volume or Channel keys for colour or
brightness adjustment after pressing MAGIC.

Scan

Your ZAPPER comes with a special Scan function which lets you "scan"
through every programme available on your TV.
To scan the programmes on your TV:
1
2
Important note: Scan may not function with a television that did not have
a programme +/- key on the original remote.
WWW.ONEFORALL.COM

Advanced Operation

= Press
= Press
= Press
Press
Aim the ZAPPER at your TV. Press and release MAGIC
then press the MUTE key.
The ZAPPER will send the command to advance
through all the programmes available on your
Television stopping at each programme for about three
seconds. Remember, you must aim the ZAPPER at your
device the entire time you are using scan.
When you find a programme you would like to watch,
simply press any key to stop the Scan feature.
then hold
then hold
then hold
then hold
9