Accessories; Maintenance - Shark HV324Q Instructions Manual

ACCESSORIES

Select cleaning accessories are included. For a list of what is included with this model, refer to the Quick Start Guide.
CREVICE TOOLS
a - 12" Crevice Tool b - 18" Flexible Crevice Tool c - Duster Crevice
Clean in between tight spaces or Extend and flex to an 18" length to Two cleaning tools in one. The
reach baseboards and ceilings with access corners, baseboards, tight crevice tool gives you extended
this slim crevice tool. spaces or ceilings. The rubberized cleaning reach for small spaces,
(163FLIHV3)
tip prevents scratches on surfaces. while the dusting brush cleans a
multitude of surfaces
(228FFJV300)
a b c
Multi-Angle Dusting Brush TruePet Motorized Brush Pet Multi Tool
™
Two cleaning tools in one. The stiff
5-position soft dusting brush for
The power of a full size upright in the
bristle brush gets stuck-on debris
cleaning shelves (straight out/ palm of your hand. Picks up pet hair, loose
downward orientation), blinds, off a multitude of surfaces. Remove
debris, and powerfully cleans dander out
the bristles to reveal an upholstery
walls, ceiling fans and lights of upholstery and surfaces.
(168FLV322B)
(upward and downward orientation). tool for removing stubborn pet hair
from upholstery and more.
Adjust the angle of this brush to the
desired cleaning surface.
(137FLIV300)
Home and Car Detail Kit
Extension wands and micro tools to clean the tightest spaces
. (XCDV300).
8
DUSTING BRUSHES
d - Upholstery Tool e - Wide Upholstery Tool f -
Perfect for grabbing pet hair Perfect for grabbing pet hair and
Great for dusting a multitude of surfaces
and lint from furniture and other lint from furniture, mattresses and such as shelves, tables, baseboards,
upholstered surfaces. other upholstered surfaces.
window/door frames, and much more.
(166FLIHV3) (165FLIHV3) Turn the brush head to adjust the
angle to the surface you're cleaning.
. (164FLIHV3)
(229FFJV300)
d e
Dust-Away ™ Hard Floor Attachment with Washable
Flexible Hose
Microfiber Pad
Stretch and flex this extension hose to clean around
objects and get into hard to reach spaces. Attach the Direct suction for big crumbs and debris while microfiber pad
crevice tool or another accessory depending on what
dusts hard wood and tile floors.
you are cleaning.
(290FFJ321)
(1126FT323)
Appliance Wand
Clean under and behind hard to move appliances and furniture with this adjustable 36" tool. Flip the extension
piece over to clean the underside of appliances.
(138FLIV300)
w w w . s h a r k r o c k e t . c o m

MAINTENANCE

To keep your vacuum's suction power optimal, follow these instructions.
Make sure unit is off and cord unplugged.
Dusting Brush
f
EMPTY THE DUST CUP
1 Press the WAND RELEASE button on the top of the
wand to disconnect it from the handheld portion.
OR
Remove the dust cup from the handheld vacuum by
squeezing the two DUST CUP RELEASE buttons on
both sides of the base at the same time and pulling it
(XHFGV321, P200W)
out.
STEP 1
STEP 2
TO CHECK FOR BLOCKAGES, REMOVE AND INSPECT:
HANDHELD AND WAND
1 Remove the wand from the handheld portion and
check all dust cup intake openings.
2 Remove the floor nozzle from the wand and check the
wand for blockages.
Empty
Empty
2 Hold dust cup over a trash bin and press the EMPTY
button on the front of the dust cup. The bottom lid
will open, allowing the debris to fall out.
NOTE: Clean the dust screen inside the dust cup as
required.
3 Once dust cup is empty, close the bottom lid and
insert dust cup back into handheld and you will hear it
click into place.
NOTE: Empty dust cup when debris reaches the MAX
fill line.
BOTTOM OF FLOOR NOZZLE
1 Use a coin to unlock the three locks on the bottom of
the floor nozzle.
2 A portion of the base is removable to allow for better
access to the brushroll and exposure to the airway.
Shine a flashlight from the bottom to check for
possible blockage in the airway.
1. 8 0 0 . 7 9 8 . 7 3 9 8
Pre-Motor filters
(1080FTV320)
Monthly
Foam
Felt
Post-Motor filter
(1084FTV320)
CLEAN THE FILTERS
1 Access the Pre-Motor foam and felt filters by lifting
the latch on the top of the handheld vacuum. Remove
and hand wash them every month. Let air dry
completely before replacing. Tap loose dirt off filters
between washes as needed. Insert the felt filter first
and then place the foam filter on top of it.
2 Access the Post-Motor filter under the handle.
Remove and hand wash once a year. Let air dry
completely before replacing.
3 Remove any string, carpet fibers or hair that may be
wrapped around the brushroll. There is a groove along
the brush bar that allows a pair of scissors to cut
across it to loosen up the debris.
4 To re-assemble, replace base by lining it up along the
front of the nozzle. Push down to snap into place until
you hear a click. Lock the three locks.
9