Break-In Period; Engine; Belt; 10-Hour Inspection - BOMBARDIER 2006 outlander max 400 Operator's Manual

BREAK-IN PERIOD

Engine

A break-in period of 10 operating hours
is required before running the vehicle
at sustained full throttle.
CAUTION: Never mix oil with fuel.
This vehicle has a 4-stroke engine.
Oil must be added to engine base
only.
During this period, maximum throttle
should not exceed 3/4. However, brief
full acceleration and speed variations
contribute to a good break-in. Contin-
ued wide open throttle accelerations,
prolonged cruising speeds and engine
overheating are detrimental during the
break-in period.
While reading this Operator's Guide, remember that:
Indicates a potential hazard that, if not avoided, could result in serious in-
jury or death.
_____________________
106

Belt

A new belt requires a break-in period
of 50 km (30 miles). Avoid strong ac-
celeration/deceleration, pulling a load
or high speed cruising.

10-Hour Inspection

NOTE: The 10-hour inspection is at the
expense of the vehicle owner.
As with any precision piece of me-
chanical equipment,
that after the first 10 hours, 300 km
(185 mi) or 30 days after the purchase,
whichever comes first, your vehicle
be inspected by an authorized Bom-
bardier ATV dealer. This inspection
will give you the opportunity to dis-
cuss the unanswered questions you
may have encountered during the first
hours of operation.
WARNING
we suggest