Recalling Stored Stations - Opel CAR 300 Manual

area will be stored on the six preset buttons
of the AS memory bank.
During automatic tuning RDS stations have
priority and will be allocated to the first
preset positions.
When leaving the reception area of the
stored stations, press the AS button again in
order to store new stations.
AS preset positions can also be allocated
manually (see "Storing stations", page 20).
If TP is switched on before or during the
auto-storing process, the unit will activate a
preset position with a traffic station
afterwards (not necessarily preset 1).

Recalling stored stations

Select the waveband ("U", "U
AS
Then press the desired preset button.
To recall the stations stored with AS, choose
the desired waveband first ("U" or "M") and
then press the AS button briefly.
SWF3
RDS [TP ] AS
Extra FM memory
In addition to the preset buttons the unit
also sets up an extra FM memory in which
all receivable FM stations are stored. You
can use the seek tuning buttons to scroll
this memory.
The extra FM memory is set up anew by
manual or automatic storing (AS).
Scrolling the extra FM memory:
Switch on RDS. Briefly press one of the
seek tuning buttons
shows the frequencies or programme
names of the stations sorted according to
broadcasting networks in the extra FM
memory.
Updating the extra FM memory:
", "M", "M ").
AS
Press the RDS button for approximately 2
seconds until you hear the beep. The
display briefly shows
MEMORY-U
The storing process takes approximately 30
seconds; the system will tune into the
strongest station of the reception area
afterwards.
The updating process does not overwrite
the preset stations!
Alternatively:
Press the AS button until the beep is
released.
Note that this procedure overwrites the
stations stored on the AS memory positions
of the preset buttons.
:. The display
or
21