Preset Buttons - Opel CAR 300 Manual

TP-VOL-3
Use the seek tuning buttons or
adjust the desired announcement volume
from -3 to +3.
Storing the TA volume:
Press the TP button for more than 3
seconds until you hear the beep.
If the button is not pressed within 10
seconds after having activated the TA
volume, the set will return to normal
operation without altering the setting.
Listening to traffic reports only
If you wish to listen to traffic reports only,
switch on TP and turn knob 1 to its
leftmost position.
Traffic messages will still be played at the
preset volume (see "TA volume").
Interrupting a traffic message
If you wish to interrupt a traffic message
(e.g. during tape operation), press the TP
button briefly. The TP function will remain
active.
20
RDS-EON
(Enhanced Other Networks)
Certain radio stations do not actually
transmit traffic programmes themselves, but
to
by using RDS-EON they offer the possibility
to receive the traffic messages broadcast by
another traffic programme station in the
same radio network. For this purpose the
unit evaluates the information of the RDS
telegram with regard to alternative traffic
programme stations.
With RDS-EON, stations not providing traffic
information are treated by the unit like traffic
programme stations. They can be
recognised by the "EON" or "TP" symbol in
the display.
Receiving traffic messages via
RDS-EON
Press the TP button. The display shows
"[TP]". If a message is received, the set will
switch to a traffic programme station of the
same RDS-EON network. During the
message, the display will show the
programme name of the traffic station.
After the message the unit will return to the
original programme.
When TP is switched on, the RDS-EON
function will also be active during tape
operation.

Preset buttons

This car radio holds a total of 24 preset
positions available:
6 x U (FM)
6 x M (MW)
6 x UAS (automatically stored
FM stations)
6 x MAS (automatically stored
MW stations)
Storing stations
Choose the desired waveband and tune in
the station. Press and hold one of the preset
buttons 8 until the radio resumes play.
During the storing process the display
shows the currently memorised station.
Now the station is stored on this preset
button. The chosen preset position 1...6
appears in the display.
When storing a station on a preset button,
RDS "ON" or RDS "OFF" will be stored as
well.
Automatic storing (AS)
Select the desired waveband (MW or FM).
Then press the AS button 9 until you hear
the beep. Seek tuning starts and "AS"
appears in the display.
After the seek tuning process the six most
powerful stations of the current reception