Basic Basic Operation Operation Operation; Switching On/Off The Unit; Faceplate Release; Sound Adjustment - LENCO CS-351 Owner's Manual

OPERATION OPERATION
OPERATION OPERATION
BASIC BASIC OPERATION OPERATION
BASIC OPERATION BASIC OPERATION
SWITCHING SWITCHING SWITCHING SWITCHING ON/OFF ON/OFF ON/OFF ON/OFF THE
Press button (14) to turn on the unit.
When the unit is on, press and hold
button (14) to turn the unit off.
FACEPLATE FACEPLATE RELEASE RELEASE
FACEPLATE

FACEPLATE RELEASE

RELEASE
Press button (2) to detach the
removable faceplate.
SOUND SOUND ADJUSTMENT ADJUSTMENT

SOUND ADJUSTMENT

SOUND ADJUSTMENT
SEL SEL
Shortly press SEL SEL/MENU
enter AUDIO SETTING
SEL SEL/MENU SEL SEL /MENU /MENU /MENU button (26) or
select the desired adjustment mode. The
adjustment mode will change in the
following order:
Bass/Treble/Balance/Fader/Sub-woof/ON/
OF(Exit)
Shortly press / (25) to adjust the sound
quality up or down step by step, press and
hold / (25) will change the sound quality
continuously.
MUTE MUTE
Shortly press MUTE MUTE button (14) will mute
the sound, press it again will resume the
sound.

LOUDNESS

LOUDNESS LOUDNESS LOUDNESS
LO UD
Press LO LOUD LO UD UD button (24) for several
seconds to switch loudness function on,
and "LOUD" will appear on the LCD. Press
it for several seconds again to release this
function, and "LOUD" will disappear.

DISPLAY

DISPLAY
DISPLAY DISPLAY
Press DSP DSP DSP button (19) to change display DSP
mode.

EQUALIZATION

EQUALIZATION EQUALIZATION EQUALIZATION
Press E E E E Q Q Q Q button (22) shortly to turn on
equalization function and to select desired
audio mode. There are five kinds of mode
as below:
FLAT→CLAS→POP M→ROCK→DSP OFF
THE UNIT THE THE UNIT UNIT UNIT
/MENU /MENU
/MENU button (26) to
mode,
/ (1) to

RESET FUNCTION

RESET RESET RESET FUNCTION FUNCTION FUNCTION
RESET RESET
RESET button (23) must be activated with RESET
either a ballpoint pen or thin metal object.
RESET RESET
The RESET RESET button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press RESET
can't work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
use
socket on the front panel.
MODE MODE SELECTION SELECTION
MODE

MODE SELECTION

SELECTION
Shortly press MOD
mode among: Radio, CD, USB, CARD,
IPOD (optional), AUX and BT Audio.
SYSTEM

SYSTEM SETTING

SYSTEM SYSTEM SETTING SETTING SETTING
Press and hold MENU
front panel to enter SYSTEM SETTING
mode. There are below items for you to
adjust.
BEEP / P-VOL / AREA / HOUR 24H / PCLK
SEL
Use SEL SEL SEL button (26) or
the item you want to change, and use
/ (25) to change the corresponding
setting.
1) BEEP: ON/OFF
To turn the beep sound on/off when
pressing the buttons on the front panel
2) P-VOL Select
P-VOL: The max volume value when you
turn on the unit. Such as when you set
the P-VOL to 40. If the volume value is
small than 40 when you turn off the unit.
Next time you turn on the unit. The
volume will keep the last volume value.
But if the volume value is large than 40
when you turn off the unit. Then next time
you turn on the unit. The volume value
will back to 40.
3) Area: Use
9
RESET button (23), the unit RESET RESET
MOD
MOD button (5) to change the MOD
MENU MENU
MENU button (26) on the
/ (1) to select
/ (25) button. You can