Using The System Reset Function - Omron GOSMART HJA-301 Instruction Manual

USING THE SYSTEM RESET
Use the system reset function in the following
cases:
• When you want to reset the initial setup data (weight,
height, clock, etc.)
• When you want to delete all data
TO RESET THE SETUP DATA:
1.
Press the SET button on the back of the
unit.
The display screen shows the SETUP section,
starting with a blinking clock.
NOTE:
Do not press the button with a sharp point. This could
cause damage.
2.
Reset the settings (refer to page 8).
TO DELETE ALL DATA/ERASE IN MEMORY:
1.
Press the SET button on the back of the
unit.
NOTE:
Do not press the button with a sharp point.
This could cause damage.
2.
Press
2 seconds.
After "ALL Clr" has been displayed, the hour flashes on
the display.
To reset the time, weight, height and stride length, refer to
"Settings" on page 8.
FUNCTION
and at the same time for at least
25