Symbol WS5000 Troubleshooting Manual page 40

3-2
WS5000 Series Switch Troubleshooting Guide
Table 3.1 Network Event Message/Parameter Description Lookup (Continued)
ID Event Message
2 Packet discard Discarded Packet: Wrong NIC <XX> <XX> vs
[wrong NIC] <YY> from access port ZZ.
3 Packet discard Discarded Packet: Wrong VLAN <XX> <XX>
[wrong VLAN] vs <YY> from access port <ZZ>.
4 AP adopt failure Adoption <XX> failed. The MAC address
[general] has been used by an existing access port.
5 AP adopt failure Access port policy prevented port with MAC
[policy disallow] <XX> from being adopted.
6 AP adopt failure This event and message is currently not
[acl disallow] configured. It will be configured in the next
service release.
7 AP adopt failure Access port <XX> was not adopted because
[limit exceeded] maximum limit has been reached.
8 AP adopt failure License denied access port <XX> adoption.
[license disallow] Maximum access ports allowed with
current license = <YY>.
9 AP adopt failure Access port with MAC <XX> can not be
[no image] adopted because no valid firmware image
file can be found.
10 AP status [offline] Access port <XX> with MAC address <YY>
is unavailable.
Taking access port <XX> with MAC address
<YY> offline.
11 AP status [alert] Access port <XX> with MAC address <YY>
is in Alert status due to country not set.
Access port <XX> with MAC address <YY>
is in Alert status.
Parameters
XX = Ethernet port that received the packet
= 1 or 2
YY = Ethernet Port that the access port was
adopted from = 1 or 2
ZZ = MAC (xx:xx:xx:xx:xx:xx) address of the
Access Port
XX = VLAN that received the packet (an
integer).
YY = VLAN the access port was adopted
from (an integer).
ZZ = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
radio or access port.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
Not applicable.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
YY = License Level (integer).
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
XX = Name (string) of the access port.
<YY> = MAC (xx:xx:xx:xx:xx:xx) address of
the access port.
XX = Name (string) of the access port.
<YY> = MAC (xx:xx:xx:xx:xx:xx) address of
the access port.
XX = Access port name (string).
YY = Access port MAC (xx:xx:xx:xx:xx:xx)
address.
XX = Access port name (string)
<YY> = Access port MAC (xx:xx:xx:xx:xx:xx)
address.