Canon Pixma G1000 series Online Manual page 241

◦ If any remaining ink level is below the single dot position,
dot position. However, if Remaining Ink Notification Settings is enabled, replenish all remaining
ink levels to the upper limit line indicated on the ink tanks, regardless of the Ink Group setting.
Start Print Head Alignment dialog box
This dialog box allows you to adjust the attachment position for the print head, or to print the current
setting value for the print head position.
Note
• For a detailed procedure on head position adjustment, see
Your Computer."
Align Print Head
Aligns the print head.
Print head alignment corrects the installation positions of the print head and improves deviated colors
and lines.
Align the print head immediately after installing the print head.
Print Alignment Value
Click this button to check the current setting value of the print head position.
Prints the current setting value for the print head position.
Print Head Alignment dialog box
To adjust the print head position, click Align Print Head in the Start Print Head Alignment dialog box,
and perform the operations instructed in the messages. The Print Head Alignment dialog box is then
displayed.
This dialog box allows you to check the printed pattern and adjust the print head position.
Preview Window
Displays the pattern of Print Head Alignment, and checks the position of the selected pattern.
You can also change the setting by clicking the pattern on the screen directly.
Select the Pattern Number
Compare the printed adjustment patterns, and enter the pattern number of the pattern with the
least visible streaks or horizontal stripes into the corresponding box.
Note
• If you do not know how to analyze the printed pattern, see
Initial Check Items (Nozzle Check)
Before running Nozzle Check, check that the printer power is on.
Then check the following item:
• Is there ink remaining?
Remaining Ink Notification Settings dialog box
When you click Remaining Ink Notification Settings, the Remaining Ink Notification Settings dialog
box appears.
replenish
"Aligning the Print Head Position from
Aligning the Print Head
241
the ink to at least the single
Position.