Canon Pixma G1000 series Online Manual page 240

Custom Settings
Opens the Custom Settings dialog
Perform this function to change the settings of this printer.
Note
• If the printer is off or if communication between the printer and the computer is disabled, an error
message may appear because the computer cannot collect the printer status.
If this happens, click OK to display the most recent settings specified on your computer.
View Print History
This function starts the Canon IJ XPS preview, and displays the print history.
Note
• You can use this function only with the XPS printer driver.
View Printer Status
Starts the Canon IJ Status Monitor.
Perform this function when you want to check the printer status and how a print job is proceeding.
Note
• If you are using the XPS printer driver, the "Canon IJ Status Monitor" becomes the "Canon IJ XPS
Status Monitor".
About
Opens the About dialog
The version of the printer driver, plus a copyright notice, can be checked.
In addition, the language to be used can be switched.
Initial Check Items (Cleaning / Deep Cleaning)
Before running Cleaning or Deep Cleaning, check that the printer power is on.
Then check the following item:
• Is there ink remaining?
Initial Check Items (System Cleaning)
Before running System Cleaning, check that the printer power is on.
Then check the following items:
• When you ran Nozzle Check, were there areas where the print was smeared or unprinted areas?
• Did the condition not improve even after Deep Cleaning was run?
• Are the remaining ink levels insufficient?
◦ Visually check whether the remaining ink levels are insufficient.
If System Cleaning is run when the remaining ink levels are insufficient, it may trigger a failure.
◦ If you selected All Colors or Black for Ink Group, check that all remaining ink levels are at least
at the single dot position indicated on the ink tanks. (The color inks are consumed even if Black
was selected.)
If you selected Color, check that the remaining ink levels for all color inks are at least at the single
dot position indicated on the ink tanks.
box.
box.
240