Loading And Changing Compact Discs; Playing A Disc; Video Output Selection - Samsung MAX-DN55 Instruction Manual

Loading and Changing Compact
Discs
GB
The CD disc changer can contain up to three 12 cm or 8 cm
compact discs without using an adapter.
Never force the compact disc carrousel when opening and clos-
ing the compartment.
Never press down or place objects on the carrousel.
Always treat your compact discs with care; refer, if necessary, to
the section entitled "Precautions When Using Compact Discs" on
page 42.
1
Switch the system on by pressing On/Standby.
2
Press the Open/Close(
Result: The compartment opens.
3
Place one or two discs in the front slots of the carrousel, with the
label on the discs facing upwards.
4
If you wish to load a third compact disc, press the Disc Change but-
ton on the front panel (or Disc Skip on the remote control).
Result: The carrousel rotates by 120°.
5
Close the compartment by pressing the Open/Close(
again.
To play...
Disc 1
Disc 2
Disc 3
Result: The compartment closes automatically and the disc selected
6
To change or unload the compact disc changer, repeat Steps 2 to 5.
On/Standby
1
Demo
PTY
12
Downloaded From Disc-Player.com Samsung Manuals
) button on the front panel.
Check that the compact disc has been correctly inserted in
the holder before closing the compartment.
If you wish to start playing a disc directly, you can also
proceed as follows.
Press...
DVD/CD (
DISC 2
DISC 3
starts playing.
Keep the compartment closed whenever you are not using
it, to prevent dust from entering.
You can load or unload compact discs when the radio,
tape or auxiliary source function is selected.
Disc 1 Disc 2 Disc 3
Disc Selection / Direct Play
5
R
RDS
Timer
Display /Clock
5
DOLBY DIGITAL
TUNER DVD/CD TAPE
Band
Mono/ST Memory CD Synchro Display Deck 1/2 REV. Mode
TAPE TAPE REC
REC/Pause Normal HI-Speed

Playing a Disc

Playback
1
Press the Open/Close(
2
Place a disc gently into the tray with the disc's label facing up.
3
Press the Play/Pause button or Open/Close(
disc tray.
On/Standby
R
Demo
RDS
PTY Display
TUNER
) button
Band
Mono/ST
REC Lock
s
) or DISC 1

Video Output Selection

Press the Dolby Surround button in POWER OFF, then it is converted to
NTSC
"
Example : Select PAL, if TV is for PAL.
When disk is set to NTSC in PAL, it doesn't operate.
Disc Change
4
2,5
On/Standby
R
Volume
Demo
+
RDS
PTY Display
TUNER
Band
–
Mono/ST
AUX
REC Lock
s
) button.
) button to close the
Disc 1 Disc 2 Disc 3
Disc Change
Disc Selection / Direct Play
Volume
Timer
/Clock
3
DOLBY DIGITAL
DVD/CD TAPE AUX
Memory CD Synchro Display Deck 1/2 REV. Mode
TAPE TAPE REC
REC/Pause Normal HI-Speed
Down Tuning Mode Up
PAL SECAM
" and select the TYPE you want.
Volume
Timer
/Clock
DOLBY DIGITAL
DVD/CD TAPE AUX
Memory CD Synchro Display Deck 1/2 REV. Mode
TAPE TAPE REC
REC/Pause Normal HI-Speed
Down Tuning Mode Up
1,3
+
–
+
–