Declaration Of Conformity; Troubleshooting - Bosch AHS 45-16 Original Instructions Manual

OBJ_BUCH-1297-005.book Page 12 Friday, August 29, 2014 9:55 AM
12 | English
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signif-
icantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC, 2000/14/EC including their amendments and
complies with the following standards: EN 60745-1,
EN 60745-2-15.
2000/14/EC: Guaranteed sound power level 97 dB(A). Con-
formity assessment procedure according to Annex V.
Equipment category: 25
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS23,
Stowmarket, Suffolk IP14 1EY, England

Troubleshooting

Problem
Hedgecutter does not operate
Hedgecutter operates intermittently
Motor runs but blades remain stationary
Cutting blade hot
Excessive vibrations/noise
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
F 016 L81 184 | (29.8.14)
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
08.08.2014
Mounting and Operation
Action
Delivery Scope
Connecting the Extension Lead
Starting
Stopping
Working Advice
Blade Maintenance
Storage and Transport
Selecting Accessories
Possible Cause
Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Extension cable damaged
Internal wiring of machine damaged
On/Off switch defective
Internal fault
Cutting blade blunt
Cutting blade has dents
Too much friction, due to lack of lubricant Apply lubricant spray (1 609 200 399)
Machine defective
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Figure Page
1 161
2 161
2 161
2 162
2, 3 161– 162
4 163
4 163
5 163
Corrective Action
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Inspect cable, replace if damaged
Contact Service Agent
Contact Service Agent
Contact Service Agent
Have blade sharpened
Have blade inspected/overhauled
Contact Service Agent
Bosch Power Tools