Noise/Vibration Information; Declaration Of Conformity - Bosch AHS 45-26 Original Instructions Manual

OBJ_BUCH-1549-005.book Page 13 Monday, November 9, 2015 11:06 AM

Noise/Vibration Information

Sound emission values determined according to EN 60745-2-15.
Typically the A-weighted noise levels of the product are:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to
h
EN 60745-2-15:
Vibration emission value a
h
Uncertainty K
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main appli-
cations of the tool. However if the tool is used for different appli-
cations, with different accessories or insertion tools or is poorly
maintained, the vibration emission may differ. This may signifi-
cantly increase the exposure level over the total working period.

Declaration of Conformity

We declare under our sole responsibility that the product described under "Technical data"
is in conformity with all relevant provisions of the directives 2011/65/EU, until 19 April
2016: 2004/108/EC, from 20 April 2016 on: 2014/30/EU, 2006/42/EC, 2000/14/EC
including their amendments and complies with the following standards: EN 60745-1,
EN 60745-2-15.
2000/14/EC: Guaranteed sound power level:
Conformity assessment procedure according to Annex V.
Equipment category: 25
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-HG/ENS-PA2,
Stowmarket, Suffolk IP14 1EY, England
Bosch Power Tools
3 600 ...
dB(A)
dB(A)
m/s
m/s
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the acces-
sories, keep the hands warm, organisation of work patterns.
3 600 ...
dB(A)
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
09.11.2015
English | 13
H47 E.. H47 J..
H47 F.. H47 K..
H47 G..
H47 H..
76 77
96 97
dB 1 1
2
2.5 4.0
2
1.5 1.5
H47 E.. H47 J..
H47 F.. H47 K..
H47 G..
H47 H..
97 98
F 016 L81 423 | (9.11.15)