Cutting With Nylon Trimmer Line - Toro 53002 Operator's Manual

Always wear gloves and protective clothing
when operating the String Trimmer.
If the trimmer head becomes jammed, stop the engine
immediately.
Make certain all moving parts have stopped and
disconnect the spark plug before inspecting the
equipment for damage.
Never use a String Trimmer that has chipped, cracked
or broken trimmer head.
Cutting with Nylon Trimmer
Line
The tip of the line does the cutting. The line should
stay extended while cutting (Fig. 12).
Figure 12
1. Three inches (7.6 cm) Above Ground
Do not force the line into the material. Forcing the line
will cause it to slap against the material, increasing
line usage and causing poor cutting results (Fig. 13).
Figure 13
Trimming
Hold the bottom of the trimmer head about 3 in. (7.6 cm)
above the ground and at an angle. Allow only the tip of
the line to make contact (Figs. 14).
Figure 14
1. Three inches (7.6 cm) Above Ground
12