Using The Network Connection Menu - Vizio E32-D1 User Manual

Using the Network Connection menu

Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed
Wireless-AC.
Connecting to a Wireless Network
To connect to a wireless network whose network name (SSID) is being broadcast:
If your TV is connected to a network with an Ethernet cable,
you will not see the wireless network connection menu.
You must disconnect the Ethernet cable to set up a wireless
network connection.
From the Network menu, tap
1.
Wireless Access Points. The
Wireless Access Points menu is
displayed.
2. Tap the name of your wireless
network (this is the network's
SSID).
3. Use the on-screen keyboard to
enter your network's password,
then tap CONNECT.
Changing the Manual Setup Settings
Advanced users can fine-tune the network settings using the Manual
Setup feature.
To manually change the settings:
From the Network menu, tap
1.
Manual Setup. The Manual
Setup menu is displayed.
2. To change the settings manually,
tap on DHCP and select Off.
3. Tap to adjust each setting:
• IP Address - The IP Address
assigned to the TV.
• Subnet Mask - The subnet mask.
• Default Gateway - Your
network's default gateway
address.
• Pref. DNS Server - Your preferred
domain name server address.
• Alt. DNS Server - Your alternative
domain name server address.
4. Tap SAVE in the top right corner
to save any changes.
51
3