Asus E3M-ET V5 User Manual page 13

11. TPM connector (14-1 pin TPM)
This connector supports a Trusted Platform Module (TPM)
system, which can securely store keys, digital certificates,
passwords, and data. A TPM system also helps enhance
network security, protects digital identities, and ensures
platform integrity.
12. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface
(S/PDIF) port. Connect the S/PDIF Out module cable to this
connector, then install the module to a slot opening at the back of
the system chassis.
13. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
• We recommend that you connect a high-
definition front panel audio module to this
connector to avail of the motherboard's high-
definition audio capability.
• If you want to connect a high-definition front
panel audio module to this connector, set the
Front Panel Type item in the BIOS setup to
[HD]. If you want to connect an AC'97 front
panel audio module to this connector, set the
item to [AC97]. By default, this connector is
set to [HD].
14. PCI Express 3.0/2.0 x1 slots
This motherboard has two PCI Express 3.0/2.0 x1 slots that support PCI Express
x1 network cards, SCSI cards, and other cards that comply with the PCI Express
specifications.
15. PCI Express 3.0/2.0 x16 slot
This motherboard supports one PCI Express 3.0/2.0 x16 graphic card that complies
with the PCI Express specifications.
ASUS E3M-ET V5
TPM
TPM_PD#
+3VSB
S_PCIRST#_TBD F_SERIRQ
F_FRAME#
GND F_LAD3
C_PCICLK_TPM F_LAD2
+3V F_LAD1
+3V F_LAD0
SPDIF_OUT
AAFP
PORT1 L AGND
PORT1 R NC
PORT2 R SENSE1_RETUR
SENSE_SEND
PORT2 L SENSE2_RETUR
MIC2 AGND
MICPWR NC
Line out_R NC
NC
Line out_L NC
1-5