Table of Contents
Advertisement
3.
Intel
LGA1151 CPU socket
®
This motherboard comes with a surface mount LGA1151 socket designed for Intel
Xeon
E3-1200 v5 series, 6th Generation Intel
®
processors.
For more details, refer to Central Processing Unit (CPU).
4.
DDR4 DIMM slots
Install 2GB, 4GB, 8GB and 16GB unbuffered non-ECC DDR4 DIMMs into the DIMM
sockets.
For more details, refer to System memory.
5.
Intel
C232 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~6)
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives
via Serial ATA 6.0 Gb/s signal cables.
When using hot-plug and NCQ, set the SATA Mode Selection item
in the BIOS to [AHCI].
6.
Speaker connector (4-pin SPEAKER)
The 4-pin connector is for the chassis-mounted system warning
speaker. The speaker allows you to hear system beeps and
warnings.
7.
System panel connector (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
•
System power LED (2-pin PWR_LED)
This 2-pin connector is for the system power LED. Connect the
chassis power LED cable to this connector. The system power LED
lights up when you turn on the system power, and blinks when the
system is in sleep mode.
•
Hard disk drive activity LED (2-pin HDD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD
Activity LED cable to this connector. The HDD LED lights up or
flashes when data is read from or written to the HDD.
•
ATX power button/soft-off button (2-pin PWR_BTN)
This connector is for the system power button.
•
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for
system reboot without turning off the system power.
ASUS E3M-ET V5
Core™, Pentium
,and Celeron
®
®
®
®
SATA6G
GND
RSATA_TXP
RSATA_TXN
GND
RSATA_RXN
RSATA_RXP
GND
SPEAKER
PIN 1
F_PANEL
+PWR LED
PWR BTN
PIN 1
+HDD_LED
RESET
1-3
Advertisement
Table of Contents
