[Sensitivity]; [Aspect Ratio] - Panasonic DMC-FX33 Operating Instructions Manual

Advanced (Recording pictures)
or setting [COL.MODE] to [NATURAL].
(P66)
• You cannot use the following functions.
– [D.ZOOM]
– [SLOW SHUTTER]

[SENSITIVITY]

Setting the light sensitivity
Press [ ] to display the [REC] mode
MENU
/SET
menu and select the item to set. (P56)
ISO is a measure of sensitivity to light. The
higher the sensitivity is set, the less light is
needed to take a picture so the camera
becomes more suitable for recording in
dark places.
• When setting to [AUTO], the ISO
sensitivity is automatically adjusted to a
maximum of [ISO200] according to the
brightness. (It can be adjusted to a
maximum of [ISO1000] when using the
flash.)
ISO sensitivity 100
Use in bright
places
Suitable
(e.g. outdoors)
Use in dark
Not suitable
places
Shutter speed
Slow
Noise Less
• To avoid picture noise, we recommend
decreasing maximum ISO sensitivity level
or setting [COL.MODE] to [NATURAL].
(P66)
• The sensitivity automatically switches to
between [ISO1600] and [ISO6400] in
[HIGH SENS.] in scene mode.
• The setting is not available when
[INTELLIGENT ISO] is being used.
([ ] is displayed.)
60
VQT1K01

[ASPECT RATIO]

Setting the aspect ratio of pictures
Press [ ] to display the [REC] mode
MENU
/SET
menu and select the item to set. (P56)
By changing the aspect ratio, you can
select an angle of view that matches the
subject.
Select to take pictures with the
same aspect ratio as a 4:3 TV or a
PC monitor.
Select to take pictures with the
same 3:2 aspect ratio as 35 mm
film.
1600
Not suitable
This is suitable for landscapes etc.
Suitable
where a wide view is preferable.
This is also suitable for playing
Fast
back pictures on a wide-screen
Increased
TV, high-definition TV etc.
• In motion picture mode [
select [
• The ends of the recorded pictures may be
cut at printing. (P111)
], you cannot
].