Brightening The Lcd Monitor - Panasonic DMC-FX33 Operating Instructions Manual

• When you take pictures with the flash
or in dark places, the histogram is
displayed in orange because the
recorded picture and the histogram do
not match each other.
• The histogram is an approximation in
recording mode.
• The histogram of a picture may not match
in recording mode and playback mode.
• The histogram displayed in this camera
does not match histograms displayed by
picture editing software used in PCs etc.
• The histogram does not appear during the
following.
– In intelligent auto mode [
– In motion picture mode [
– In clipboard mode [ ]
– Multi playback
– Calendar playback
– Playback zoom

Brightening the LCD Monitor

1 Press [LCD MODE] for 1 second.
2 Press 3/4 to select a mode.
[ ]: [AUTO
POWER LCD]
[ ]:
[POWER LCD]
[ ]:
[HIGH ANGLE]
]
]
[OFF]
3 Press [MENU/SET].
DISPLAY/LCD MODE
A
A The [AUTO POWER LCD] icon
([ ], [
([ ]) or [HIGH ANGLE] icon ([
appears.
Advanced (Recording pictures)
The Power LCD is
automatically activated in
bright places such as
outdoors etc. When the
power LCD is activated,
[ ] changes to [ ].
The LCD monitor
becomes brighter and
easier to see even when
taking pictures outdoors.
The LCD monitor is
easier to see when taking
pictures with the camera
held high above your
head. This is useful when
you cannot get close to
the subject because
there is a person in the
way. (However it
becomes more difficult to
see when looked at
straight on.)
The LCD monitor returns
to the normal brightness.
]), [POWER LCD] icon
])
33
VQT1K01