Hotspot; Bluetooth Settings - Samsung Galaxy MEGA User Manual

• Auto network switch: Auto switch between Wi-Fi networks and mobile
networks.
• Wi-Fi timer: Automatically connect or disconnect from a Wi-Fi network. Touch
Wi-Fi time to set the Starting time and Ending time.
• MAC address: View the phone's MAC address, needed for connecting to some
secured networks (not configurable).
IP address: View the phone's IP address (not configurable).
•
WPS push button: Set up a connection to a WPS (Wi-Fi Protected Setup) router or

other equipment.
WPN PIN entry: View the PIN used by your phone to set up a PIN-secured

connection to a Wi-Fi router or other equipment (not configurable).
Help: Get help using Wi-Fi.


Hotspot

Use your phone as an Internet Access Point (AP) using Hotspot. This allows other devices
(maximum of 8) to connect to the AP via a Wi-Fi network—giving the connected devices access
to the Internet.
Connect a Device
1. Press
2. Touch OFF/ON to enable Hotspot.
3. On the target device, activate Wi-Fi. Then scan for Wi-Fi hotspots. Select the name of
your phone to connect.
4. On your phone, follow the prompts to connect to the targeted device.

Bluetooth Settings

Bluetooth is a short-range communications technology that allows you to connect wirelessly to a
number of Bluetooth devices, such as headsets and hands-free car kits, and Bluetooth-enabled
handhelds, computers, printers, and wireless devices.
For more information about using Bluetooth, see Bluetooth.
1. Press
2. Touch OFF/ON to turn Bluetooth on, then touch Bluetooth.
3. Touch to configure these settings:
Settings
and then touch
and then touch
> Settings > Connections tab > Hotspot.
> Settings > Connections tab.
114