Bedding - Samsung WF0702WJ series User Manual

PRE WAsh
3
sElECTION bUTTON
DElAy END
4
sElECTION bUTTON
TEmPERATURE
5
sElECTION bUTTON
RINsE sElECTION
6
bUTTON
sPIN sElECTION
7
bUTTON
WF0602WJ-02907H-04_EN.indd 23
Wool - Only for machine-washable wool. A load should be less than 2.0
kg.
• The wool course washes the laundry using gentle cradling actions.
During the wash, the gentle cradling and soaking actions are
continued to protect the wool fibers from shrinkage / distortion and
for a super gentle clean. This stop operation is not a problem.
• Neutral detergent is recommended for wool course, for improved washing
results and for improved care of the wool fibers.
The wool wash cycle of this machine has been approved
by Woolmark for the washing of machine-washable
Woolmark products provided that the products are
washed according to the instructions on the garment
label and those issued by the manufacturer of this
washing machine, M0809(WF06*****),M0810(WF07*****)
(Certificate Number issued by I.W.S. Nominee Co., Ltd.)
Hand Wash - A very light wash cycle as gentle as a hand wash.
Spin - Performs an additional spin cycle to remove more water.
rinse + Spin - Use for a load that needs rinsing only or to add rinse-
added fabric softener to a load.
Press this button to select pre-wash. Pre-wash is only available with:
Cotton, Synthetics, Denim, Bedding, Dark Garment, Daily Wash, Baby
Care.
Press this button repeatedly to cycle through the available Delay End
options (from 3 hours to 19 hours in one hour increments).
The hour displayed indicates the time when the wash cycle will be
finished.
Press this button repeatedly to cycle through the available water
temperature options:
(Cold( ), 30 ˚C, 40 ˚C , 60 ˚C and 95 ˚C).
Press this button to add additional rinse cycles. The maximum number
of rinse cycles is five.
Press the button repeatedly to cycle through the available speeds for the
spin cycle.
WF0702 / WF0602 All Lamps Turn Off,
WF0700 / WF0600 All Lamps Turn Off,
"No spin " - The laundry remains in the drum and no spin cycle is
performed after the final drain.
"Rinse Hold (All Lamps Turn Off) " -The laundry remains soaking in the
final rinse water. Before the laundry can be unloaded, either a Drain or
Spin cycle must be performed.
, 400, 800, 1000, 1200 rpm
, 400, 600, 800, 1000 rpm
washing a load of laundry _23
2012-4-12 10:40:17