Using The Start/Stop Function; Auto-Stopping The Engine - Volvo XC 90 Quick Manual

using tHe stArt/stop Function

this function pauses the engine temporarily when the car is stationary
and then starts it again automatically when the journey is resumed.
start/stop is available when the engine is started and can be
activated if certain conditions have been met.

Auto-stopping the engine

– stop the car with the brake pedal and keep your foot on the pedal.
in an 8-inch driver display a beige
12-inch driver display the tachometer's needle points at
the engine is auto-stopped. in Comfort or Eco drive mode, the
engine may auto-stop before the car is completely stationary.
Options for auto-starting the engine
– release the brake pedal. with Auto Hold activated, the accelerator
pedal must be depressed.
– Maintain foot pressure on the brake pedal and depress the
accelerator pedal at the same time.
– on downhill slopes: release the brake pedal and allow the car to
start rolling. the engine auto-starts after a small speed increase.
– when Adaptive cruise control or pilot Assist is activated, depress
the accelerator pedal or press
keypad.
Deactivating the function
Start/Stop
– press the
the centre display. the function is deactivated until it
is reactivated, until the car is started again or until the
Comfort or Eco drive mode is selected.
symbol is shown, and in a
when
on the steering wheel's left-hand
button in the function view in